Preloader
Cart
cload
Checkout Secure
Spend $x to Unlock Free Shipping

Order Online Or By Phone

Phone Icon 855-270-5340

Mon-Fri 9am-7pm CST

  • Specially designed to meet the unique requirements of dispensing Kombucha fermented tea from a keg
  • Dispense system consists of stainless steel and food grade plastic to ensure cleanliness
  • Durable steel construction with stainless steel top and built-in drip tray to collect spills
  • Spacious interior easily holds one full size keg or up to four 5-gallon kegs
  • NSF compliant and ETL sanitation listed for commercial use

Full Description

Equally at home in a trendy restaurant or your very own kitchen, the Kegco KOMC1S-1 Commercial Kombucharator has been specially designed with everything you need to dispense a Cornelius keg of kombucha, a nutritional probiotic tea packed with compounds that support your digestive and immune systems, detoxify, energize, clarify your skin, prevent disease, and elevate your mood. This kombucha dispenser is durable enough to withstand the abuse of retail environments yet small and portable enough to be ultra-convenient in residential use. It has been ETL and ETL Sanitation Listed and is NSF Compliant, meeting the requirements of widely accepted safety standards for kombucha keg dispensers. Whether you're a small business owner that wants to offer delicious kombucha on tap or just a kombucha lover dreaming of enjoying your favorite beverage by the keg, the KOMC1S-1 will be perfect for you!


Specifications

  • Includes a brand new 5 lb. Aluminum CO2 Tank
    This tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 13-14 kombucha kegs depending upon your fill. 5.5" diameter, 18.25" height.
  • Includes Single Gauge CO2 Regulator
    This regulator works with any CO2 tank with a CGA-320 valve. The single gauge measures PSI, indicating how much pressure is inside of the keg. Adjustable output pressure is 0-60 psi. Features 3000 psig Max Primary Inlet, 60 psig Safety Relief Valve R82, female CGA-320 connection, and ball valve outlet with 5/16" OD hose barb connection. Total ports include two primary 1/4" FNPT ports and two secondary 1/4" FNPT ports. This UL listed, compressed gas regulator is for use with air, CO2, and inert gases.
  • Includes 5 feet of 5/16" I.D. Blue Air Line Assembly with 2 Snap Clamps
    Standard 5 fot length of 5/16" I.D. Blue Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two plastic snap clamps with a reusable clamp design.
  • Includes Ball Lock Home Brew Keg Couplers
    This set includes both a gas in and beer out coupler and works with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
  • Includes a 3" diameter Stainless Steel Draft Tower
    The tower is a commercial grade single gauge, single faucet, 3" diameter stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 feet of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking.
  • Keg Storage Capacities:
    • One (1) Full Size / 1/2-Barrel (15.5 Gal.)
    • One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
    • Two (2) 1/4-Barrel Slim (7.75 Gal.) or
    • Four (4) 1/6-Barrel (5.25 Gal.)
  • Maximum Ambient Temperature: 100 degrees Fahrenheit
  • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
  • Continuous cold air channeled through tower to ensure cold product
  • Heavy-duty stanless steel top
  • Built-in drip tray with drain
  • Stainless steel interior walls and ceiling
  • Rubber Floor Mat prevents damage to interior
  • Magnetic gasket provides positive door sealing
  • Self-closing door with lock
  • Refrigeration system utilizes ozone friendly R134a refrigerant
  • CFC-free foamed-in-place Polyurethane insulation
  • Knockout for remote CO2 tank
  • Stainless steel finish
  • ETL and ETL Sanitation Listed for Commercial Use

 

Keg Configurations:


Some configurations require external CO2 tank mount.

UPC: 700697206449

 



Downloads

Instruction Manual

Energy Guide



Additional Information
Card image cap
  1. Blower Hose for Air-Cooled Tower

    Keep the beverage line cooled all the way up to the back of the faucet

  2. Fan-Forced Cooling

    An interior fan provides rapid cool down and ensures consistent temperatures

  3. Internal Thermometer

    Quickly and accurately monitor the internal temperature at a glance

Card image cap
  1. Knockout for external CO2 Tank or Drain Hose

    This knockout allows you to mount your CO2 tank outside the cabinet or direct the drip tray runoff to an external drain

  2. Drip Tray Drain Receptacle

    Any spills from the faucet can be directed into this bottle for quick and easy cleaning

Card image cap
  1. Steel Walls

    Behind these walls lies foamed in place polyurethane insulation to maintain a specific steady temperature

  2. Rubber Floor Mat

    A rubber floor mat reduces the shock of heavy kegs on the stainless steel floor


4" locking casters make this kombucharator easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides superior cooling and cool air is fan-forced into the tower to ensure your kombucha stays cold all the way up to the faucet.

This kombucha dispenser includes a draft tower with a stainless steel faucet and fittings, a set of ball lock keg couplers for Cornelius home brew kegs, a single gauge CO2 regulator, and an aluminum CO2 tank. One 5 lb. tank can pressurize up to fourteen 5-gallon kegs before needing to be refilled. Although everything needed to tap a ball lock Cornelius keg is included, the KOMC1S-1 features many customizable features. The standard faucet is made of durable and sanitary stainless steel, but you have the option to upgrade to a Perlick faucet, which has less internal surface area to prevent a sticky faucet knob. The included ball lock keg couplers are food grade plastic and are designed to prevent corrosion, but you can also upgrade to stainless steel ball lock couplers. View the options below and feel free to call us at 1-800-710-9939 option 1 if you have any questions.